Automatic tray feeding machine

SYS-GPT Automatic tray feeding machine
Classification:
Ningbo Dayu Yazaki Machinery Manufacturing Co., Ltd. is a modern company dedicated to agricultural machinery, design, development, production, sales and service. The company is located in Fenghua District, Ningbo City, Zhejiang Province, China, with superior geographical location and convenient transportation.
Product Details
Product Features



Easy connection to the seed drill


Talent
1. It can be easily installed on the seeding machine for seeding, and it is easy to disassemble.
2. Just turn on the power, no special operation is required.
3. Two stacks of seeding trays can be placed at a time, with a maximum of 15 trays per stack, reducing the frequency of placing trays. 4. Through simple adjustment, it corresponds to 500~1300 trays/hour seeding machines for seeding.
5. It can meet most seeding trays on the market.
6. Combined with the seeding tray conveyor, more seeding trays can be placed to achieve continuous supply. 7. By replacing accessories, 25 cm/30 cm seeding trays can be used.
Parameter
[*1] The number of trays per stack should be less than 15/stack, otherwise it may cause mechanical failure or stoppage.
[*2] Beam specifications: length 1.8 meters, power: 90W, power supply: 220V 50HZ.
[*3] Air compressor specifications: power supply: 220V, power: 800W, flow rate: 0032 cubic meters/Min, pressure: 0.7Mpa.
[*4] Seedling tray selection: width 295~300mm (9 inches) width 245~250mm (7 inches)
Height greater than 37~40mm
Edge width C=7~11mm
When stacking trays, the gap requires 20~25mm for the same specification of seedling tray
Recommended products
MESSAGE